|
Do It Yourself Systems
- up to 10 fully programmable zones.
- all zones programmable as burglary or fire
- all zones supervised for low battery, tamper and device fault
- any zone may be converted to a keyswitch for arming/disarming the system
- 12 programmable access codes
- 1 installer access code, 1 downloading computer access code
- 10 user codes including 1 master user code
- 1 of the user codes may be programmed as a "one
- time use" code
- open/close and partial close reporting by access code
- "quick exit" allows user to exit an armed system easily
- "home" mode provides security of perimter arming while premise is occupied
- auto-interior bypass
- when turned on...automatically bypasses interior zones if no exit is detected after
arming
- door chime
- when turned on...causes Sounder to beep when a delay or instant zone is activated
- individual reporting of zone alarms, tamper alarms, low battery,
AC failure, devise fault (supervisory) and restorals.
- 3 audible options:
- 8 programmable zone types:
- delay 1, delay 2, instant, interior, 24 hour, 24 hour medium buzzer, key switch arm, and
fire
- 22 programmable system options including:
- quick exit, auto interior, door chime, one
- time use code, pre
- alert volume setting, keypad alarm disable and interior zone delay
- 5 programmable system times:
- entry delay 1 & 2, exit delay, burglary alarm cut-off time, and fire alarm cut-off
time
- alarm history
- system retains a record of sensors that went into alarm during past armed periods
- alarm history can be viewed from keypad or remote computer
- upload/download capability
- program system from remote computer via DSC DLS software
- view status, trouble conditions and alarm history
|
